 Model Number |
WT-8010G |
Product brief:
|
wintoptec is proud to present our Gigabit media
converter series in Order to answer and satisfy todays need for an
increase of bandwidth And speed. The WT-8010G Series offters several
different selections from 1000Base-T to fiber optic Gigabit in multi-mode
or single-mode
1000Base-SX/LX;Therearealsoseveraldifferentsingle-modeoptionsavailablefor10,20,and
120Km(6.2, 12.4, and 31 miles)distance.
The flexible and easy to
uses,WT-8010G serise is one of the most versatile media Converters in the
world,It has a stand-alone kit ideal for desktop use, and is also wall
Mountable. It's available in a 19�rack mountable chassis that hold up to
16 units of WINTOPTEC's Ethemet and Gigabit Ethernet media converters for
central control purposes.
WT-8010G Series features
easy to understand diagnostic LEDs.These LEDs show details in
Link,Transmit/Receive,Full/Half duplex,and power status .
|
 Elucidation: |
|
二.Features
�nbsp;Compliant with
IEEE 802.3 10BASE-T, 802.3u 1000BASE-TX, 1000BASE-FX Ethernet Standards.
�nbsp; Provide one
10/100/1000BASE-T port with RJ-45 connector, one 1000BASE-FX port with SC
connector supporting single-mode fiber and single-fiber bi-direction.
�nbsp;Front panel
Diagnostic LED Indications
|
number |
LED |
function |
status |
Describing |
|
1 |
DUP |
UTP port duplex LED |
ON |
Full duplex |
|
OFF |
Half duplex |
|
2 |
FP-LINK |
Fiber port link/action status LED
|
ON |
Fiber link is ok. |
|
OFF |
Fiber link is fail. |
|
3 |
PWR |
Power LED |
ON |
Power is ON. |
|
OFF |
Power is Fail. |
|
4 |
RX |
UTP port link/action status LED
|
ON |
The data arrive native |
|
Blink |
Data is send out not transmiting
|
|
OFF |
The data does not send out |
|
5 |
1000 |
UTP port speed LED |
ON |
1000M speed |
|
OFF |
100M speed |
|
6 |
TX |
UTP port link/action status LED
|
ON |
The data send out
|
�nbsp;Extended single-mode fiber optic
distance up to 120km
�nbsp;Provided 19�system chassis for up to
16-converter with Redundant Power supply for optional Expansion use
�nbsp;All the transceivers used in the WT-8110 series
are made by WINTOPTEC and are very good quality
三.Specifications
|
Standard |
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX, 100BASE-FX
|
|
Network Media |
10/100/1000BASE-T: 2-pair UTP Cat. 3, 4,
5, up to 100 m (328 ft)
10/100/1000BASE-TX: 2-pair UTP Cat. 5,
up to 100 m (328 ft)
1000BASE-FX: 50/125µm or 62.5/125µm
multi-mode fiber optic cable, up to 2 km
9/125µm or 10/125µm single-mode fiber
optic cable, up to 120km |
|
Protocol |
CSMA/CD |
|
Topology |
Star |
|
Number of Ports |
1 x 10/100/1000BASE-TX auto-negotiation,
auto-MDIX
1 x 1000BASE-FX |
|
Network Data Transfer Rate |
10M,10/100M,10/100/1000Mbps
(Full-duplex) |
|
Diagnostic LEDs |
Per Unit : Power
Per port: Link/Activity,
Full-duplex/Collision, Speed (only for TX port) |
|
Connectors |
UTP RJ-45, SC/ST Fiber connector |
|
Fiber |
SC/ST/FC/LC Multi-mode: 50/125, 62.5/125 or 100/140
µ m
Single-mode: 8.3/125, 8.7/125, 9/125 or 10/125 µ m
|
|
Power |
Internal 110-265VAC 48VDC |
|
Dimensions (WxDxH) |
111x 140 x 30 mm |
|
Temperature |
Operating: 0 ~ 40 o C
Storage: -10 ~ 70 o C |
|
Humidity |
Operating: 10% ~ 90% RH
Storage: 5% ~ 90% RH |
|
Emission |
FCC Class B
CE mark Class B
VCCI-B |
CAN SUPPLY THE PICTURE OF
PRODUCT
|
四.Ordering Information
COPYRIGHT
All rights reserved.
No part of this publication may be reproduced, storedin a retrieval system, or
transmitted in any form or by any means, whetherelectronic, mechanical, photo
copying, recording or otherwise, without theprior written permission of the
publisher.
FCC WARNING
This equipment has
been tested and found to comply with the limits forclass B device, pursuant to
part 15 of FCC rules. These limits aredesigned to provide reasonable protection
against harmful interference ina commercial installation. This equipment
generates, uses and canradiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to
radio communication. Operation of this equipment in a residential area is
likelyto cause harmful interference, in which case, the user will be required
tocorrect the interference at the user's own expense.
CE
This is a Class B product. In a domestic environment, this
product maycause radio interference in which case the user may be required to
take adequate measures. Take special note to read and understand all content
given in the warningboxes
|
Click to enlarge image
Related Keywords:
Bookmark / Share this page