Model Number

WT-8110SW

WT-8110SW series is a kind of 10/100Mbps adaptive fast Ethernet fiber converter (also called optical-to-electric medium converter) with a built-in four-port 10M/100Mbps adaptive switch, which can implement mutual conversion between four independent 10Base-T/100Base-TX twisted pair electrical signals and 100Base-FX optical signals. This type of fiber converter can extend the transmission distance of a network from 100m over copper wires to 120 Km (single-mode full duplex mode). This type of fiber converter supports two different types of network connection media types: 10/100Base-TX and 100Base-FX. With the application of the switching technology and the storing & forwarding technology, the converter can implement data transmission between the two types of network connection media. This kind of converter supports transmission in dual-fiber multi-mode, dual-fiber single-mode and single-fiber single-mode fibers

二.Features

Adaptive 10Mbps and 100Mbps environments, for the convenience of network upgrading;

Efficient built-in switching core, to implement flow control and reduce broadcast packets;

Providing four independent 10/100Mbps adaptive switching-type twisted pair ports, to implement electrical interface backup and multi-user access;

Providing four electrical interfaces based on VLAN switch setting, and supporting the connection of users from different units;

Supporting full-duplex and half duplex transmission modes and capable of automatic negotiation;

Supporting automatic crossing of twisted pair ports, for the convenience of system debugging and installation;

Supporting the transmission of extra-long packets (with the maximum length of 1552 bytes);

Supporting Quality of Service (QoS) and ensuring transmission of VoIP packets;

Supporting Spanning Tree Protocol (STP) to form a redundant network;

Low power consumption, low heat dissipation and capable of stable operation for a long period of time;

Supporting the selection of multiple types of fiber ports such as dual-fiber multi-mode, dual-fiber single-mode and single-fiber single-mode, expanding the requirements of users;

三.Application

10/100Mbps fast Ethernet long-haul transmission network

CAN SUPPLY THE PICTURE OF PRODUCT

四.Technical Specifications

Parameter	Specifications
Access mode	10/100Mbps
Standard	IEEE802.3 10Base-T Ethernet,IEEE802.3u,100Base-TX/FX Fast Ethernet, IEEE802.3x Flow control,IEEE802.1q VLAN,IEEE802.1p QoS,IEEE802.1d Spanning Tree
Wavelength	850nm/1310nm/1550nm
Transmission distance	Dual-fiber multi-mode: 2Km; dual-fiber single-mode: 25/40/60/80/100/120Km; single-fiber single-mode: 25/40/60/80/100Km Category-5 twisted pair: 100m
Port	One RJ45 connector, connected to STP/UTP category-5 twisted pair One fiber port: Multi-mode - SC or ST (fiber size: 50,62.5/125µm) Single mode - SC/FC fiber port (fiber size: 9/125µm) Single-fiber single-mode - SC/FC fiber port (fiber size: 9/125µm)
Conversion mode	Medium conversion, storing and forwarding
MAC address table	I K
Buffer space	1Mbit
Flow control	Full duplex state: flow control; half duplex state: back pressure mode
Delay	9.6us
Bit error rate	<1/1000000000
MTBF	100,000 hours
LED	POWER (power), FX LINK/ACT (fiber connection/action) FDX (FX full duplex mode), FX100 (Fiber, with a transmission rate of 100M) TP1/2/3/4 LINK/ACT (1/2/3/4-port twisted pairs connection action) TP1/2/3/4100 (1/2/3/4-port twisted pairs, with a transmission rate of 100M)
Power	DC5V/1A (external)
Power consumption	3.5W
Operating temperature	-10~55�
Operating humidity	5%~90%
Storage temperature	-40~70�
Storage humidity	5%~90% (non-condensing)
Dimensions	26mm(Height)*70mm(Width)*98mm(Depth) (external power)

五.Ordering Information

Model	Working wavelength	Fiber	Electrical port	Fiber model	Tx power(dBm)	Rx power(dBm)	Transmission distance
WT-8110sm-2S	1310nm	SC	RJ-45	Dual-fibe Multi-mode	-22 to -12	= -30	2km
WT-8110SW-25S	1310nm FP	SC/FC/ST	RJ-45	Single mode Dual -fiber	-15 to -8	= -37	25km
WT-8110SW-40S	1310nm FP	SC/FC/ST	RJ-45	Single mode Dual-fiber	-8 to -3	= -37	40km
WT-8110SW-60S	1310nm FP	SC/FC/ST	RJ-45	Single mode Dual-fiber	-3 to 0	= -37	60km
WT-8110SW-80S	1550nm DFB	SC/FC/ST	RJ-45	Single mode Dual-fiber	-8 to -3	= -40	80km
WT-8110SW-100S	1550nm DFB	SC/FC/ST	RJ-45	Single mode Dual-fiber	-3 to 0	= -40	100km
WT-8110SW-120S	1550nm DFB	SC/FC/ST	RJ-45	Single mode Dual -fiber	0 to 3	= -40	120km
WT-8110SB -25A (B)M	1310/1550nm FP	SC	RJ-45	Single mode single-fiber	-13 to -8	= -36	25km
WT-8110SB -40A (B)M	1310/1550nm FP	SC	RJ-45	Single mode single-fiber	-8 to -3	= -36	40km
WT-8110SB -40A (B)M	1310/1550nm DFB	SC	RJ-45	Single mode Single fiber	-10 to -5	= -36	40km
WT-8110SB -60A (B)M	1310/1550nm DFB	SC	RJ-45	Single mode Single-fiber	-5 to -3	= -36	60km

四.Ordering Information

COPYRIGHT

     All rights reserved. No part of this publication may be reproduced, storedin a retrieval system, or transmitted in any form or by any means, whetherelectronic, mechanical, photo copying, recording or otherwise, without theprior written permission of the publisher.

FCC WARNING

     This equipment has been tested and found to comply with the limits forclass B device, pursuant to part 15 of FCC rules. These limits aredesigned to provide reasonable protection against harmful interference ina commercial installation. This equipment generates, uses and canradiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. Operation of this equipment in a residential area is likelyto cause harmful interference, in which case, the user will be required tocorrect the interference at the user's own expense.

CE 

     This is a Class B product. In a domestic environment, this product maycause radio interference in which case the user may be required to take adequate measures. Take special note to read and understand all content given in the warningboxes